We now simplify how to add or change the phone number that is dialed when the alarm button is pressed and how to change the setting for the fall sensor. You can access this functionality at the user level, i.e. by selecting users in the department and making the setting per user and unit.

  1. Enter the ward where the user is located and select the user. Click on the eye to the left of the user’s name to access the user’s settings page.
  2. Press the Alarm Settings menu item at the top right and then the Other Functions option in the menu bar below.
  3. Tap on the device name and then on the alarm button and fall sensor to open the setup menu.
  4. Now check with the user that the selected device is turned on.

Continue to add or change phone number

  1. Press the Add phone number button and fill in the desired phone number. Make sure it is the correct number including the emergency number.
  2. Press the save icon directly to the right of the phone number.
  3. To add more than one phone number, press add phone number again.
  4. Once all the phone numbers are in place, press Save at the bottom right of the page.The phone numbers will then be transferred to the device and an information box will appear stating that it may take up to three minutes before it is registered on the device.
  5. Wait for these minutes and then test on the device to make sure it is correct.